Senior Clinician
Currently Offline
Posts: 181 
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Jan 24, 2016 12:22:30 GMT -6
I am going to replace my lines and hoses once I un tamper proof my carb. I want to bypass the vacuum petcock with a manual one. I'm don't know my way around a 4 stroke carb so I was wondering what inlets I need to plug if I eliminate the vacuum petcock.  The fuel inlet is obscured but I see 2 that I'm not sure of. Do those get capped? |
|
Senior Clinician
Currently Offline
Posts: 223
Likes: 17
Joined: Jul 11, 2015 15:38:38 GMT -6
|
Post by trashtruck12172 on Jan 24, 2016 16:50:19 GMT -6
unless the fuel pump is malfunctioning, i would leave it. if it ain't broke, don't fix it. otherwise you can eliminate the pump, run a direct line from the tank to the fuel inlet of the carb, and block off the vacuum source on the intake manifold and hope your carb gets enough fuel.
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Jan 24, 2016 18:33:52 GMT -6
I'm confused about the overflow outlet up top (not the bowl drain tube). It's missing the tube. What does it drain too?
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 4
Joined: Apr 20, 2014 22:41:42 GMT -6
|
Post by jomama0867 on Jan 25, 2016 5:32:23 GMT -6
The stock carbs come with a drain tube (see pic).  |
|
|
|
Post by Alleyoop on Jan 25, 2016 12:43:10 GMT -6
|
|
..BAD TO THE BONE..