Turn signals By thxcuz (Read 463 times)

[thxcuz]

At one time both my rear turn signals worked. Now only the right one works. The front left turn signal never worked. I see scrappy dog sells the whole unit, do I need to buy the whole megillah or can I replace the lamps?
If the latter is the case, is there a tutorial? I can't seem to find one.
I have a taotao atm 50 (or sunny type II on scrappy dog)

[cyborg]

Should be a couple of fine screws holding the lens on ,,,or if there is a small rectangular pocket molded into the lens on the edge just put a straight blade screw driver in there and turn,,,that will pop off the lens so you can get at the bulb