Clinician
Currently Offline
Posts: 14
Likes: 0
Joined: Dec 30, 2015 12:59:09 GMT -6
|
Post by metalburner on Apr 26, 2016 16:50:32 GMT -6
I think my rear wheel bearing is going out lots of play in it anyone changed one of these before? Grateful for any tips.
|
|
|
|
Post by czmdiver on Apr 26, 2016 17:48:24 GMT -6
What ya got for a scoot bro? Do have any noise or? A little side to side Play? Have you checked the Axle Nut Itself? loosey she'l have side to side play Looks Like This?  |
|
Clinician
Currently Offline
Posts: 14
Likes: 0
Joined: Dec 30, 2015 12:59:09 GMT -6
|
Post by metalburner on Apr 26, 2016 21:26:28 GMT -6
Got a grinding noise when i back of the throttle and side to side play in the wheel its a taotao powermax 150
|
|
|
|
Post by olivertwisted on Apr 27, 2016 4:41:21 GMT -6
Burnin some metal are ya metalburner ?!  I changed mine out on my Jonway 150 and it was rusted and corroded on there! Actually, I broke a 3 ton puller before I got the 5 ton to do the job along with a torch and a sledge hammer, lol! YOU won't have too hard a time though. My entire bike was in that condition and you are starting off nice and shiny. One thing that I can impart to you to make the job of pulling the old and putting the new one in easy,is to use the tool loan program at O'Reilly or Auto Zone if you have one of those around. If not, many of your chain type auto parts stores will loan the set to ya. If you need a 3 jaw puller, a bearing pulling/install set, that's the ticket. Here's what mine looked like when it came off finally so, don't let a stinkin' girl show ya up, you can do it!    After assembly...  Hopefully, this vid helps out too Link to part 2 |
|
|
|
Post by czmdiver on Apr 27, 2016 6:55:45 GMT -6
Burnin some metal are ya metalburner ?! I changed mine out on my Jonway 150 and it was rusted and corroded on there! Actually, I broke a 3 ton puller before I got the 5 ton to do the job along with a torch and a sledge hammer, lol! YOU won't have too hard a time though. My entire bike was in that condition and you are starting off nice and shiny. One thing that I can impart to you to make the job of pulling the old and putting the new one in easy,is to use the tool loan program at O'Reilly or Auto Zone if you have one of those around. If not, many of your chain type auto parts stores will loan the set to ya. If you need a 3 jaw puller, a bearing pulling/install set, that's the ticket. Here's what mine looked like when it came off finally so, don't let a stinkin' girl show ya up, you can do it! After assembly... Hopefully, this vid helps out too Link to part 2 |
|
|
|
Post by Alleyoop on Apr 27, 2016 16:34:41 GMT -6
HAHAHAHA, METALBURNER may not show his face again after Oliver told him "don't let a stinkin' girl show ya up" . You Go Girl   Alleyoop |
|
Clinician
Currently Offline
Posts: 14
Likes: 0
Joined: Dec 30, 2015 12:59:09 GMT -6
|
Post by metalburner on Apr 27, 2016 16:55:03 GMT -6
Thanks for the tip got it apart today waiting for new bearings from eagle atv update to follow.and i'm not scared of girls just spiders and the i.r.s. lol
|
|
|
|
Post by Alleyoop on Apr 27, 2016 17:16:39 GMT -6
GOOD MAN!! and good job, yea it helps when you can see what it took someone else to do something. I always say Pictures and Videos are worth a thousand words.
Alleyoop
|
|
|
|
Post by olivertwisted on Apr 29, 2016 1:40:45 GMT -6
LOLOL! Good times, good times.... Cool! Makin' progress metalburner  |
|
..BAD TO THE BONE..
