Clinician
Currently Offline
Posts: 34
Likes: 0
Joined: Aug 12, 2012 9:58:34 GMT -6
|
Post by dhull on Jun 15, 2016 11:48:23 GMT -6
It's inspection time for Big Red, my MC-54-250b, and I have a lighting problem. I have tail lights, but there is no change to their brightness when I apply the brake handles. The brake switches seem to be working because I can start the bike, which I wouldn't be able to do if they were bad.
|
|
Clinician
Currently Offline
Posts: 34
Likes: 0
Joined: Aug 12, 2012 9:58:34 GMT -6
|
Post by dhull on Jun 15, 2016 12:03:10 GMT -6
Nevermind, fellow scooters. I found the answer on another thread. In actuality, the brake lights have always been on. I hit the starter without pulling the brake handle and it turned over, so I looked and sure enough, my left side brake switch was stuck.
|
|
|
|
Post by cyborg on Jun 15, 2016 12:37:23 GMT -6
Whew!!!!! That was easy,,, thank goodness
|
|
|
|
Post by cyborg on Jun 15, 2016 12:39:31 GMT -6
Oh a tip that was passed on to me,,, and has worked very well,, clear silicone spray,,, they use it to lube food service equipment,,, non staining and doesn't attract dirt/grit
|
|
