Clinician
Currently Offline
Posts: 1 
Likes: 0
Joined: Nov 12, 2016 5:39:59 GMT -6
|
Post by redneckgal69 on Nov 12, 2016 5:48:16 GMT -6
Just did a boatload of upgrades on my 50cc Motobravo scooter. I take it off the work horse, go to kick start it and notice its acting weird. Long story short there is now a giant crack in my crankcase! My question is what kind of work am I looking at? Im just curious before I start tearing things open. Thanks!
|
|
|
|
Post by czmdiver on Nov 12, 2016 12:35:50 GMT -6
I saw the picture over at Dansgarage, I thought is was only the CVT cover itself. Is the actually Engine case cracked also. If the Engine case itself is cracked you done May try JB weld or Alum epoxy on the CVT cover but I don't think it will last as there is some flex going on with that cover and the repair will be short lived. Try to source a used one. A new one is around $55 bucks. btw im pistonguy over on Dansgarage.  |
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Nov 12, 2016 12:41:47 GMT -6
Two choices tig weld or replace. Plastics will not hold up on gy6 engine cases.
|
|
|
|
Post by cyborg on Nov 13, 2016 11:02:02 GMT -6
It's new cases time
|
|
