Senior Clinician
Currently Offline
Posts: 181 
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Apr 3, 2017 14:15:24 GMT -6
I'm futzing around with the xingyue ita 150 again and I was able to get it to kick over with starting fluid.
Then it blew a fuse.
Next to the ground battery connect there is a bare green wire I assume gets grounded to the frame, is that a correct assumption?
|
|
|
|
Post by cyborg on Apr 3, 2017 17:29:30 GMT -6
Yep
|
|
Senior Clinician
Currently Offline
Posts: 181
Likes: 2
Joined: Jan 10, 2016 0:49:57 GMT -6
|
Post by thxcuz on Apr 4, 2017 15:48:09 GMT -6
I think it wasn't grounded because I tried it again this time insuring a proper ground and I haven't poped a fuse since.
I'm getting no suction between the petcock and the carb so I have to look at that next. Since my head doesn't have PAIR I blocked off a nipple at the petcock and one on the intake. But I'm not 100% I did it right
|
|
|
|
Post by cyborg on Apr 5, 2017 14:20:27 GMT -6
Could be a bad petcock,, or the manifold nipple could be plugged as well
|
|
