Help with roller size By salmonriver (Read 629 times)

[salmonriver]

50cc tomos..Picked it up as a project a month ago...put new plug,carb cdi, all fluids,air cleaner and manifold...It runs..lol..Ok my ?..took the cover off to check the belt and it looked ok,,went another step and looked at the rollers..2 have flat spots on them...so i want to change them out but have no clue what to buy...Im new to this and im loving it.....Im a big guy 230 and i no weight will keep my top end down...Im really looking for it to just run good and get me from a to b.....thanks for any help...

[cyborg]

I'm sure any online to tomos dealer will have what you need ,,,or eBay I would imagine

[seanstr]

Do you have a scale? Weight the ones you have in grams, then measure the rollers in metric. This will give a good idea of where you are starting at. Then decide what you want as results.

Heavier higher top end save a little bit more gas. Lighter, takes off faster uses a bit more gas. IMO

Ever gram you go up or down changes the RPM's by 500 RPM's Sliders are nice if you can keep them in the variator not getting shifted as mine kept doing.

You can go one gram up from the weights you are on and have little affect on total performance but might have a slightly higher top end.

Also you can get a tuning kit from Prima on eBAY. They are very useful.

All this is dependent on the carb being tuned correctly.

Have fun

Do one change and check results.