Maddog 50cc wire harness Piaggio lx50 engine By chinascoot (Read 7,251 times)

[chinascoot]

Need a little help with firing this engine. I've got it temp mounted in my mad dog frame and before I do any drilling or welding I want to fire the engine.

I've got everything hooked up. Went with stock gy6 carb, cdl, coil etc.

I go to connect stator wire and I've got 2 wires coming out of the lx50 engine. My😂😂😂😂 my mad dog harness wants those 2 wires then an additional plug with yellow, white and green wires. I've looked at the lx50 wire diagrams and maddog. Im stumped gentleman.

Your assistance is very much appreciated.

Thanks

[cyborg]

Run the puaggio ignition

[tvnacman]

The piaggio ignition system is different than the gy6. The stator on the piaggio engine is what you need to be using. Use the piaggio setup as cyborg stated.

John