Clinician
Currently Offline
Posts: 17 
Likes: 0
Joined: Mar 13, 2018 10:29:09 GMT -6
|
Post by johnnybravo on Mar 24, 2018 11:11:59 GMT -6
Price is right ,,,but how's the quality? Idle is still too low,,,the shaking after warm up is the enrichner shutting off so the idle is dropping Idle is set just under 2k. |
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Mar 13, 2018 10:29:09 GMT -6
|
Post by johnnybravo on Mar 24, 2018 11:12:40 GMT -6
Price is right ,,,but how's the quality? Idle is still too low,,,the shaking after warm up is the enrichner shutting off so the idle is dropping Idle is set just under 2k. I removed the clutch and ran the engine. It purrs smoothly. |
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Mar 13, 2018 10:29:09 GMT -6
|
Post by johnnybravo on Mar 26, 2018 18:52:38 GMT -6
Idle is set just under 2k. I removed the clutch and ran the engine. It purrs smoothly. Here's the old and new clutch. Tomorrow is it's trial run.  |
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Mar 13, 2018 10:29:09 GMT -6
|
Post by johnnybravo on Mar 27, 2018 7:56:53 GMT -6
Still waiting for decent weather. Ok. The scooter was doing fine, not shaking at idle. Then it warmed up and it was shaking again. The clutch Bell is blued like it was overheated. I'm pretty sure that the clutch is warped. I found a new clutch assembly on eBay for 26.99 with free shipping from Texas. Is this a decent find? Thanks New clutch installed. Rides like a new bike. Pics posted below of new and old clutch. |
|
