Low voltage to headlights, no brake lights. Need to go to w By chickenswarm (Read 371 times)

[chickenswarm]

I've only got around 2.75-3.5 VDC going to the headlight assembly. I've got lights on the brake assembly, but no change when I hit the brake switch. Turn signals light and flash.

This may be unrelated, but I feel it should be mentioned: the ignition switch stopped working yesterday. I can start if I jump the starter solenoid. I believe this to be related to a problem with the rear brake kill switch, but didn't want to leave it out in case it's related.

[chickenswarm]

I'm getting 20-22 VAC off the stator at idle.

[cyborg]

Check all terminations and grounds related to the ignition