Doc's Anything Goes
Currently Offline
Posts: 58 
Likes: 0
Joined: Apr 7, 2015 0:08:58 GMT -6
|
Post by twodogsnme on Jul 12, 2020 12:42:56 GMT -6
Hi everyone...i have a 2020 Icebear 150cc vision that I have changed all exterior bulbs to led. All was working fine..til 1 day the electric start button wouldn't start the scooter.so I kicked it over...i have all lights/horn except brake lights high/low beam and electric push button start.
Any thoughts?
|
|
|
|
Post by kz1000st on Jul 16, 2020 19:46:18 GMT -6
Fuse, ground, loose connection. Something is not connected anymore or a wire is rubbed through someplace.
|
|
Clinician
Currently Offline
Posts: 3
Likes: 0
Joined: Jul 6, 2020 20:22:05 GMT -6
|
Post by deejais on Jul 22, 2020 20:02:20 GMT -6
Hi -- I'm afraid I can't address your original problem, but I have a question: I have a 50cc IceBear project that I'm in the process of fixing. On the long list of things is to replace the rear turn signals. I like the LED ones: they look cool and are very cheap. But I'm wondering if I can just wire them directly into the harness that the original incandescent turn signals, or do I have to have a resistor or flasher. What was your experience? Thanks. -DJ- |
|
