wiring diagrams By joejoe072473 (Read 1,669 times)

[joejoe072473]

i help a few of my friends with scooters and i was wondering if anyone can help me find a wiring diagram for a 07 matrex manco. im having probs with the lighting system. he was riding it and all of a sudden he lost all lights in front. taillight works brakes and turn signals all work but now headlights or dashlights. any suggestions any help would greatly be appreciated

[felliott]

Check and see if it is charging the battery. Needs around 14.4 volts at 5000 rpms. There is a lot of trouble with bulbs burning out.

[Alleyoop]

Also check your fuse coming off the battery, they use real cheap fuses and it could of come loose or blown.
Alleyoop

[joejoe072473]

bulbs are good and the stator seems to be working properly. battery is new

[tvnacman]

trace the grounds
find the junction with the where all the grounds connect in the harnes

[joejoe072473]

i multimetered the power and grounds everything good there. i was thinking either switch or stator

[Alleyoop]

Well usually the headlights and instrument panel are driven off the Battery, so I do not think it has anything to do with your stator. If you have a Chargeing Gauge on your instrument panel see if its charging.

On my Ice Bear Trike, All my lights work off the battery. I can turn the key on and put on my lights, brakes turn signals etc. Naturally when I put on my Headlights they draw quite a bit.
Alleyoop

[joejoe072473]

this matrex has a light switch on right side and high/low on left. all the connectors are hooked up. all the bulbs seem ok. and on this model the lights dont come on until the bike is running

[joejoe072473]

well i figured the problem out. It was the light switch. it was bad put new switch and they worked again. Thanks again for all the help