Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 23, 2010 11:09:54 GMT -6
|
Post by sctrdawg on Dec 15, 2010 23:18:06 GMT -6
my throttle cablekeeps getting stuck and it seems to be due to the cold at night!! i replaced it today and it stuck again tonight !! had to ride twelve miles with it stuck wide open!! thought maybe moisture in the cable froze it stuck, but the one i put on today has bee inside out of the elements!! HELP!!!!!!
|
|
|
|
Post by Alleyoop on Dec 16, 2010 2:22:35 GMT -6
Check the cable by the Carb, if the two nuts are loose that hold it to the Carb the cable will rotate and cause it to bind. Also the postion of the cable going back to the throttle is important, the cable bend going back to the throttle should be straight up or pointing to the Left of the carb in other words sort of going around the carb. I found that if I have the cable pointing away from the carb it tends to bind.
Alleyoop
|
|
|
|
Post by Bashan on Dec 16, 2010 10:05:35 GMT -6
Well Alley has it about all covered. One thing I've run into is that little rubber cone can slip down and lodge between the butterfly wheel and cable but I'm sure you would have noticed that. Here's a handy tool from Motion Pro for lubricating the cable in case nothing else works. Just click on the image. Rich
|
|
..BAD TO THE BONE..
