Scootertronics? By 13lky2 (Read 560 times)

[13lky2]

Anyone had a good experience with this place? I noticed they have an item that no other vendor carries and would like to purchase it to be able to undo the air cleaner modification I ended up doing. Just wondering if anyone has had a good experience or if they are as bad as I have read.

Thanks!

[kz1000st]

Mike is a very strange guy. If he has what you want you'll get it in a hurry. If he has to order it you could be waiting a long time for it to come-if at all. Dealing with him is a total crapshoot from his past history. If you try to contact him he gets belligerent and you may not ever get what you want.

[13lky2]

www.scootertronics.com/gy6airintake.html

CAI for GY6 scooters, this would allow me to go back to a stock carb shroud/fender combo and fill the gap left by removing the factory airbox.

Thanks!

[Bong]

^^^^^ Agreed!!!!! A radiator hose will do the same job at 1/3 the cost. Plus you can cut it to the perfect length. Either have the air filter as close as possible to the carb (Better performance)or, extend it out to show off the filter.

$60 is a bit high IMO. Your mostly paying for the K&N filter not the intake hose. Let's Say $40 for the filter and $20 for the hose. Even though they say the filter is "Thrown In"

Notice just below in the "Much Needed Accessories" the K&N filter alone costs the same amount Maybe there Throwing In the hose for free

[Bong]

Wait Nevermind. Now I am confused, The ad states an Emgo filter is included but the K&N is pictured below. Oh well.

Anyways $60.00 is to much for an intake hose!!!!

[13lky2]

Yeah, the K&N is an added option. The same filter directly from K&N is $41.99 and since I just bought one that fits on the carb I have, I think I will either go with the radiator hose option or mebbe try my hand with pvc tubing. I guess if I wanted to get really fancy, I could just go get some tubing mandrel bent and clamp it up that way and use the K&N I have.

[Bong]

If you have a filter that fits the carb just clamp it on and be done. No need for extra hose unless the engine mount is in the way or ya just wanna show off. Just my opinion. Take it or leave it ;D ;D

[13lky2]

Here is what it currently looks like, I was wanting to get a new fender and pipe it out the old air intake slot.