Post by damin69 on Apr 24, 2011 20:30:57 GMT -6
Ok so here is the start of the Pictures and such for HID install for a MC-62-250 and VOG 260. Also Power port. I am upgrading my MC-62-250 to HID and in the process I am installing a dual 12v port for GPS and Phone charging. Instead of having all of the wires and Fuses right next to the battery I am installing a Fuse Block in the small compartment under the 12v Power ports. This should help clean up the wiring around the battery.
Here are some of the items I have gone with for the install.
Went with the Raised Fuse block to get the fuses out a bit so they are easier to reach under the power ports.
ATC/ATO 4-way Raised Fuse Block
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350455847812&viewitem=&sspagename=ADME%3AL%3AOU%3AUS%3A1123
Went slim this time as I had found out on my last install the bigger balasts are bulky and the slim give you way more leeway and options for mounting.
HIDs with SLIM balasts
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=390035826742&ssPageName=STRK:MEWAX:IT
And now my Twin 12 Volt Power Outlet I am using
www.oreillyauto.com/site/c/detail/CSM0/10242.oap?keyword=power+outlet&pt=N0318&ppt=C0092
Ballasts mounted
Power Port Mounted.
More to come when I get closer to finishing up. My LED Tail and signals and Fuse block should be here tomorrow. Not sure if I will get time during the week to get them installed and get scoot buttoned back up or if I will have to wait until next weekend. Hoping to get time during the week and maybe ride to work later in the week. Only time will tell.
Here are some of the items I have gone with for the install.
Went with the Raised Fuse block to get the fuses out a bit so they are easier to reach under the power ports.
ATC/ATO 4-way Raised Fuse Block
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350455847812&viewitem=&sspagename=ADME%3AL%3AOU%3AUS%3A1123
Went slim this time as I had found out on my last install the bigger balasts are bulky and the slim give you way more leeway and options for mounting.
HIDs with SLIM balasts
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=390035826742&ssPageName=STRK:MEWAX:IT
And now my Twin 12 Volt Power Outlet I am using
www.oreillyauto.com/site/c/detail/CSM0/10242.oap?keyword=power+outlet&pt=N0318&ppt=C0092
Ballasts mounted
Power Port Mounted.
More to come when I get closer to finishing up. My LED Tail and signals and Fuse block should be here tomorrow. Not sure if I will get time during the week to get them installed and get scoot buttoned back up or if I will have to wait until next weekend. Hoping to get time during the week and maybe ride to work later in the week. Only time will tell.