PJ's Tank Replica By Bashan (Read 849 times)

[Bashan]

PJ has his own board on Scooter Doc called PJ's corner. Check it out if you haven't seen it. He also has a very cool scooter that is our featured scoot.

Here is his own description:

• 2010 Tank replica: GS Motorworks cy-50-a
  
• New 80cc gy6 from Rapidjim.
  
• High preformance cam
  
• Dr. Pulley sliders
  
• New variator and clutch
  
• Wire harness replaced with my own wires
  
• 11 pole stator

I'd like to take this opportunity to announce PJ and Alleyoop have joined our staff as new moderators. They are loyal Scooter Doc members and have worked very hard for the forum. Congratulations guys! Rich

[LUKE]

congrats PJ and Alley!!.....pls be patient on me ok..LOL
you both deserve the position......grats guys!!!

[Cruiser]

Nice scoot, PJ. Looks like a cousin to my VIP50. You have done a lot of under the hood mods on this baby. Mine is basically stock.

Congratulations to you and Alleyoop on working your way up through the ranks.

[puddle jumper]

Thanks guys I'm doing my best to learn the ropes right now then more I learn the better I will be at this. The scoot is a good runner I travel to dialysis everyday with it so I average about 30miles a week. The color when I ordered it was supposed to be yellow backordered so the co sent me red. I will soon change the color of it using vinyl like they use on signs so I'll make sure plenty of pictures will be taken. The box is changing to but that will be that it will have lights. Any questions about it feel free to ask. I do have in the long term works a 100cc motor I plan to stick in it that will be faster than this

[mcalli]

Congrats! you both deserve it. And now Rich has more help! Nice looking bike pj.