Certified Clinician
Currently Offline
Posts: 52
Likes: 0
Joined: Aug 18, 2010 22:08:42 GMT -6
|
Post by mikecop on Sept 10, 2011 1:04:45 GMT -6
I have the Roketa 250B with Linhai engine. What carburetor should I buy, and where? Is the Mikuni a good one, and which model?
I was told that I could get a carburetor which is more adjustable and better than the original one for $35 - $40. Most I looked at on line were quite a bit more expensive than that. Thanks. Mike
|
|
Certified Clinician
Currently Offline
Posts: 56
Likes: 0
Joined: May 20, 2010 19:42:26 GMT -6
|
Post by go4it on Sept 11, 2011 0:59:45 GMT -6
Her's the one I bought for me 250 54B a few months ago. It mounted perfectly and ran fine. Only thing different was the drain for the float bowl had a valve on the carb instead of on the end of the hose. And the idle adjustment screw was a different angle but I was still able to adjust the idle with no problem. The scooter would not start at all with my old carb evan after cleaning. I installed this one and it popped after a few cranks. After that it started instantly on the first hit. It comes the the high speed screw already set at 2 turns out from seat which is a good place to start. You can refine that adjustment as needed. I crashed my 54B 2 days after mounting this carb (scoot was tottaled) but I actually swapped out the new carb with the old one before they towed my scooter off. I am hoping it will also fix the CF Moto V5 I just bought. If not I'll be putting the carb up for sale. Bob PS...Note. It says this carb is for a GY6 but I went by the pics and as I said it mounted perfectly and all the tubes were in the right places. ANd it even came with a new choke. cgi.ebay.com/ebaymotors/30mm-Carburetor-Carb-GY6-250cc-Scooter-Go-Kart-ATV-/390338014321?pt=Other_Vehicle_Parts&hash=item5ae1f56c71 |
|
