Gasket kit (Pic Added) By Gti (Read 564 times)

[Gti]

I bought a gasket kit, when I bought the parts to build my engine. Last night as I was going to start assembling I realized that there was no gasket to join the case half together (Portion of the case where the cylinder fits together.) Am I missing something or is there not a gasket that goes there?

[Deleted]

There is suppose to be a gasket there. Which is where the two halfs meet around the cylinder which is this one. After This one goes another one for the Starting Clutch area when you close it with the crankcase that has the dip stick.

[Gti]

The gasket that goes between these two halves. This is the gasket I think I am missing.

[Deleted]

[Alleyoop]

Here it is:
Alleyoop
www.partsforscooters.com/GY6_crankcase_cover_gasket_right

[Deleted]

Feb 24, 2012 14:33:02 GMT -6 Alleyoop said:

Here it is:
Alleyoop
www.partsforscooters.com/GY6_crankcase_cover_gasket_right

are you sure its not this one?
www.partsforscooters.com/Right_crankcase_gasket_164-89_gy6

The one you posted is for the Starting Clutch side

[Gti]

Alright. I was thrown off by the piece that goes across where the picsion comes out. I got her straight now.

[Deleted]

Feb 24, 2012 14:37:01 GMT -6 Gti said:

Alright. I was thrown off by the piece that goes across where the picsion comes out. I got her straight now.

ohh okie. Glad you got everything going!

[Gti]

Thanks for your help. This is one of the great things I LOVE about this forum is the fact that people are willi9ng to help without making you feel stupid!! I am an obvious noob who decided to take on a task that people said was impossible for me to do, but I am getting it done. Just a little slow but its getting there. Once again THANK YOU for all of your help!

[Alleyoop]

The one I posted is for the Starter Clutch side that is correct, I did not post one for the inner half only the outer half.
Alleyoop