cvt belt question By gingel (Read 1,003 times)

[gingel]

Hi,

My scooter has a 750 x 19.5 x 28 belt.

If i use a 759 x 20.1 x 30 belt, should it be ok?

Do you know where u can find a 750mm belt, with a good price?

The scooter is a 125cc.

Thank you.

[sprocket]

The 750 is a Honda belt , nothing else will fit properly. The 759 might work but it might not..

try here
www.scooterdomain.com/Belt_MRP_750_19_5_28_HONDA_125CC_p/n-mp-09284.htm

[redrider]

Here is some Honda scooter parts , I have ordered a CID for my 150 elite from these guys it worked great . They also have a chat feature during the day and they will help u find the part. The only issue is that I paid with PayPal and they charged me a $1 PayPal fee ,which would have been fine if they would have told me about it.

www.monsterscooterparts.com/honda1.html

[gingel]

The scooter is a SYM brand.

[Alleyoop]

What motor is in there, get the number off the case they ususally scribe it on the engine case by the left side. Also is it a long case motor or short case motor if you know.
Alleyoop

[gingel]

Hi,

The scooter is a SYM, so the engine don't have any numbers on it like
157qmj or 152QMI.
It's only have a serial number to identify it in the vehicle license.

My scooter have the same engine like the SYM Megalo 125cc.
www.bikez.com/motorcycles/sym_megalo_125_2007.php

The scooter name is Duke Classic 125cc, i didn't find it anywhere else,
except in israel.
This is a picture of my scooter:
www.levi-itzhak.co.il/Levi/Templates/showpage.asp?DBID=1&LNGID=2&TMID=302&FID=454&PID=1864&IID=1866
The only thing is, that i have an older model, so it have a front drum brake.

[Alleyoop]

BUMMER!! I was hopeing for a motor number, well you can get the same size belt that is on there and see if it fits like in the picture I put up. If it fits a little loose then I would try the 157QMJ short case like mine which takes a 743-20-30 belt which should also fit. Reason I know is I have a belt 750-19.5-28 I tried all kinds of combinations to see if I could get more performance or not back in 2010, actually I carry that belt as a spare.
Alleyoop

[gingel]

I don't see any picture...

The 750 x 19.5 x 28 belt will fit because this is the size of the original SYM belt for this scooter.

The problem, it's hard to find this size belt.

So i thought maybe to put a 759 x 20.1 x 30 belt.
Do you think it will be too loose?

[Alleyoop]

OOPs, the picture is on another thread(haha) but here it is, if it fits nice a snuge like in the picture it is fine if it sags in the middle top or bottom to loose:
Alleyoop

[gingel]

thank you.