Proper headlight adjustment By raven (Read 638 times)

[raven]

I broke the plastic side tab trying to adjust the lights.I sanded the silver coating off and glued it back together.I then dremel sanded the openings bigger at the top and 400 grit hand sanded the the backside of the grill to remove the rough finish.It won't break again.Two of the screws that mount the light assy were stripped so I put longer one's in.

Attachments:

[raven]

I had to use a hand reamer to open up the holes for the grill fastners, so that the grill doesn't touch the len's

Attachments: