Clinician
Currently Offline
Posts: 9
Likes: 0
Joined: Apr 29, 2012 9:03:15 GMT -6
|
Post by jerundax on May 9, 2012 19:00:29 GMT -6
So I have the motor on my new 50cc Chinese gy6 clone broken in. I had to adjust the idle because it started stalling at stoplights. I have heard that the low speed mix is set very lean on these. Should I adjust this also? If so how do I get the cap off that is covering the screw?
|
|
|
|
Post by Alleyoop on May 9, 2012 19:03:46 GMT -6
What year is the Scoot, if it is earlier than a 2010 then the screw is behind the plug if its a new Scoot there MAY NOT be a screw behind the plug. But to find out you have to drill the plug out, no other way. Most will just buy a After Market carb and mess with the old one after they get the new one in. Think of it this way you will have spare parts all but the Fuel Ratio Screw.
Alleyoop
|
|
Clinician
Currently Offline
Posts: 9
Likes: 0
Joined: Apr 29, 2012 9:03:15 GMT -6
|
Post by jerundax on May 9, 2012 19:23:32 GMT -6
Ok good to know thanks
|
|
|
|
Post by Alleyoop on May 9, 2012 19:30:30 GMT -6
Here is a VIDEO on drilling it out:
Alleyoop
|
|
Clinician
Currently Offline
Posts: 9
Likes: 0
Joined: Apr 29, 2012 9:03:15 GMT -6
|
Post by jerundax on May 9, 2012 21:20:00 GMT -6
The scoot is a '11. I may just be better off getting an after market carb. Thanks for th info though.
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on May 9, 2012 21:40:33 GMT -6
Drill it out......should some thing go wrong then an after market carb
|
|
|
|
Post by Alleyoop on May 9, 2012 21:51:51 GMT -6
|
|
|
|
Post by Cruiser on May 10, 2012 13:50:27 GMT -6
|
|
|
|
Post by Alleyoop on May 10, 2012 14:41:10 GMT -6
Great find Cruiser, cheap plus free shipping can't beat that. I always tell folks google and find who has the better deal cause the prices are all over the place.
Alleyoop
|
|
50cc 2011 Sunny clone.
..BAD TO THE BONE..
