want to add rear marker/clearance lights By bigz (Read 1,004 times)

[bigz]

Hello Everyone

I have a 2011 tiger trike=Ice bear. It does not have much for lights in the rear. I bought marker/clearance lights and want to put them in the place of the reflectors. Does anyone know the best way?

thank you much for the help!

Attachments:

[Alleyoop]

Bigz,
You came to the right place, two guys added lights in back there to replace the reflectors.
I am sure they will chime in, one is Mike6736 and the other is Leenark
Alleyoop

Here are Mikes lights I don't have Lees.

[Alleyoop]

You can buy different types of lights that you can also just mount them flat on the fenders. And then string the wires up to your regular running and stop lights and splice into each lights wires and then your ground. But I would get LED lights they hardly draw any amps and will not effect your charging system. Plus LED are nice and bright.

All you need is to hook them up to the Wire going to the socket that carries the running light voltage and then also to the wire that carries the voltage when you squeeze the brakes. Its really easy to hook them up I use this to splice in they are quick connects.

Also use the FLAT Male and Female plug ins so you can unplug the lights so you can take off the Rear Cover when you need to.
Alleyoop

[mike6736]

Mine are mounted a little different than that picture but the higher the better, mine are just about 3 inches above the top of the rear fenders... LEDS and are from Harbor Freight

Miked

[Alleyoop]

WHAT YOU UPGRADED and I HAVE the old picture!! Send me the upgraded picture so I can put the right stuff up or put a before and after(HAHA).
Alleyoop

[bigz]

Thank you very much for the information, I will look into this and see if i can find it.
But now i have to work on my muffler the vibration or whatever made my muffler break right in half:-(

Thanks again everyone

[roguesquid]

I want to know about the rack. That is money when you are already trying to save money riding the scooter. With the rack I can at some of my toys on the road with me.

[mike6736]

The rack is just a ATV rack... Cut off the mounts and have new ones made to fit you trike

Mike

[roguesquid]

can you show me how you mounted the rack?