Adding and draining coolant in cvmoto V5 By routhier (Read 727 times)

[routhier]

Suggestions on where to find coolant entry location and coolant drainage plug, how much coolant is needed and any particular kind? I guess in short, because I'm not mechanically inclined, would appreciate a "crash course".

[go4it]

If you don't get your answer here you may want to try this site. There's a lot of V5 and V3 owner there (including me). www.alternativecruisers.com/index.php?board=60.0

Bob

[Bashan]

You can get the owner's manual right off of the CF Moto site. Here are the drain locations for the CF Moto and Linhai engines. The engine in your V5 is the CN 250, the same one they used to put in every CF Moto/Qlink 250. They are no longer making that engine for new vehicles, just replacement inventory. The only 250 they make now is for the EFI Jetmax. Rich

[go4it]

Yep, Bashan has it correct. Here's a link for a blow by blow fluid change on a V5. You can also download a complete V5 manual while your there. Just look under "downloads".

www.alternativecruisers.com/index.php?topic=19620.0

Bob