ignition switch wiring By trvstlh (Read 1,707 times)

[trvstlh]

Hello and thanks to "JUSTBUGGIN", i understand that the wiring that comes from the ignition switch can affect the charging system, well my plug from ignition has been cut on both ends neither plug is there just wires. can someone please tell me which 2 wires from ignition side ties together, and or what colors go to what colors, looks like only 2 wires may be of same color on either end? i think i have 4 wires coming from switch and 3 wires on the other end. having a problem reading the wiring diagram, when it shows the Antitheft remote device, is this the alarm and remote starter box. wiring dia. shows RED, GREEN, BLCK/WHTE,,WHICH COLOR IS THE WIRE THAT THE DIA. SHOWS WITH FUSE ATTACHED. THANKS IN ADVANCE.

[rob63]

The wire with the fuse is black. Not sure on the antitheft device. What colours do you have on the ignition switch, and what colours do you have on loom end ?

[trvstlh]

will verify all colors and which ends their coming from tonite, where does the black wire with fuse attached go to? BTW thanks for help.

[trvstlh]

also if someone can tell me what color wires goes into the plug on the loom end that attaches to the plug from ignition switch (and what color are the wires connected to plug coming from ignition switch plug)

[rob63]

The black wire is the accessory wire, it feeds things like your horn, gauges etc. On the diagram the wires coming from the ignition seem to be the same colour going into the loom.
If charging is your problem then have a look at the battery, on the positive post there will be a thick red and thin red wire. The thick wire goes to the starter solenoid, the thin wire goes through a fuse to the regulator/rectifier (called a manostat in the diagram). This thin wire is what charges the battery, check the fuse in this wire, check that you have continuity in the wire from the reg/rect end to the battery.

[tvnacman]

trv please post pics of what your asking about . You may have stated what scooter you have in another thread , I don't see it in this one .

John

[trvstlh]

Thanks guys, i have 2007 jonway yy250t

[trvstlh]

Wire color from ignition switch: brown/white...red/white....blck/white...red...orange & black, can u tell me where do these go 2 on the loom side? Thanks in advance...plug has been cut

[rob63]

So you`ve got six wires coming from the ignition switch ? How many from the loom and what colours are they ? Also is this the original ignition switch ?