Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Aug 23, 2012 16:09:11 GMT -6
Today i was installing my new carb and when i put the key in it just started to turn over. I removed the key and the switch and it still does it. so no that my battery is dead im racking my head to figure out why?
any suggestions?
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Aug 23, 2012 16:23:52 GMT -6
Sounds like your alarm needs a labodimy.
John
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Aug 23, 2012 16:29:40 GMT -6
no alarm no kill switches
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Aug 23, 2012 17:55:59 GMT -6
check to see if you have power and ground to the coil of the starter solinoid . If you don't then your solinoid is shorted . if you do you need to trace where it is comming from .
John
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Aug 24, 2012 12:38:18 GMT -6
The solenoid could have welded itself closed..fairly common problem
|
|
|
Post by Alleyoop on Aug 24, 2012 13:51:57 GMT -6
Alleyoop
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Aug 24, 2012 14:54:35 GMT -6
Hey Chriss long time no see clock many chino clicks ?
John
|
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Aug 25, 2012 13:07:18 GMT -6
Yup some..been flying coast to coast mostly
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Aug 25, 2012 17:51:26 GMT -6
Now I have no spark...replaced stator about 2 months ago, cdi and regulator 3 weeks ago. I wonder if a wire is bad since they start switch got stuck and it ran the battery down before I could disconnect it. It started fine before I changed the carb.
|
|
|
Post by Cruiser on Aug 25, 2012 22:53:45 GMT -6
I may have missed this someplace, but what kind of scoot do you have?
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Aug 25, 2012 23:39:54 GMT -6
150cc ..it was a stuck switch that caused the initial issue, but now i think it is the pickup coil. I have no evidence of melted wires however, these wires where very hot after the 2 minutes it took me to unhook the battery.
|
|
|
Post by Cruiser on Aug 26, 2012 12:31:14 GMT -6
Thanks for the 150cc info, I already had guessed that. I'm trying to verify the brand name like Roketa, Tao Tao, Lance, JCL, etc., along with the model number or any other model name. This makes a difference on the wiring diagrams. Not all 150cc scoots are alike.
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Aug 26, 2012 16:32:27 GMT -6
its a geely...i have the wiring diagram and i have made a wiring harness for it about 1 yr ago. My issue now is when the switch stuck it over heated a wire..i just need to pull the harness and find out which one. i suspect it is going to be from the regulator since everything has checked out ok so far.
|
|