Scooter Doc
Currently Offline
Posts: 330
Likes: 1
Joined: Nov 2, 2011 14:28:14 GMT -6
|
Post by Gti on Dec 19, 2012 21:27:04 GMT -6
Well I finished the engine today and installed it on the bike. Problem 1 occurred when I realized that the air filter was ripped. I have a 30mm carb so if you have suggestions for a good one let me know. Problem 2 is that when i try to turn over the engine, the solenoid clicks and the starter does nothing (High Torque), so I pull it out of the engine and see if it will do anything outside of the case, Nothing. So I switch to another starter, same problem, same trouble shooting methods and the same results. The battery has 13.396 volts at the battery and again at the solenoid.
|
|
|
Post by Alleyoop on Dec 19, 2012 22:55:25 GMT -6
Have you tried jumping the SOLENOID? Just touch both terminals on the SOLENOID and see if it spins your starter. Alleyoop
|
|