Scooter Doc
Currently Offline
Posts: 316
Likes: 0
Joined: Feb 28, 2011 12:11:27 GMT -6
|
Post by justbuggin on Feb 5, 2013 23:15:52 GMT -6
have you check the cables from the battery to the chassis and selniod and the starter the factory cable ends then to cut through the wire and make poor connections i would replace all the eyelet on both the battery + side and the neg side clean all paint of where the grounds connect to the frame and the motor
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 5, 2013 23:41:18 GMT -6
gonna do all the above and get a new battery and solenoid hope it fixes it
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 5, 2013 23:45:18 GMT -6
has me frustrated didn't plan to put alot of money in this build
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 6, 2013 9:27:03 GMT -6
what is strange there is no ground wire to the frame or to the valve cover it looks to be all hooked to the battery.
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Feb 6, 2013 10:47:26 GMT -6
I looked again there is no green wire at all just two black wires and they are both connected to the battery, the guy that i bought it from did some strange wiring stuff, what to do now? And the dash doesn't light up when i turn the key it never did it has a make shift iginition also.
|
|
