Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: Apr 22, 2013 6:25:53 GMT -6
|
Post by jbrez on May 15, 2013 15:14:55 GMT -6
I have an agility 50, and I am getting a noise from the front tire area. I am pretty sure it is coming from the speedo conection on the front tire. the speedo still works fine, its just making noises. any ideas.
|
|
Senior Clinician
Currently Offline
Posts: 167
Likes: 2
Joined: Jun 4, 2011 10:43:50 GMT -6
|
Post by gatekeeper on May 15, 2013 17:15:29 GMT -6
I would pull the front wheel and check to see if there is grease in the speedometer drive gear (puck). I would also check the wheel bearings for grease and smooth operation while the wheel is off.
Before you do this take note, does the noise go away when the brakes are applied? If so the brakes could be partially dragging, causing the noise.
|
|
|
Post by Bashan on May 16, 2013 4:50:44 GMT -6
Um...yeah, what he said. That about covers it. I did find a pic of the puck (green arrow) but with the cable removed:
I had one fail and it made a grinding noise just before it went south. In the above pic it's just being used as a spacer.
|
|
Clinician
Currently Offline
Posts: 4
Likes: 0
Joined: Apr 22, 2013 6:25:53 GMT -6
|
Post by jbrez on May 16, 2013 12:11:06 GMT -6
that worked no greese in puck thanks for the help.
|
|