Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: May 16, 2013 13:54:07 GMT -6
|
Post by carmelotrump76 on May 19, 2013 15:21:27 GMT -6
I have a TNG grand sport 150cc scooter and the high beam went out, I'm getting all the power to the light (h3) bulb on my voltmeter, could it be the switch is bad, also there is a green wire that looks like it was soldered to something before but can't find where to, but anyways that wire is not connected to anything, it is located under the seat. any help would be appreciated.
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: May 16, 2013 13:54:07 GMT -6
|
Post by carmelotrump76 on May 19, 2013 15:22:27 GMT -6
oh yeah I seen somewhere online that it could be a dump wire.
|
|
|
|
Post by Alleyoop on May 19, 2013 15:58:16 GMT -6
Could be, Green wires are ground and if it has a male or female connector try and look around for a wire with the opposite type connector.
Alleyoop
|
|
Senior Clinician
Currently Offline
Posts: 222
Likes: 4
Joined: Mar 26, 2013 16:50:01 GMT -6
|
Post by jjoshua20213 on May 19, 2013 19:12:17 GMT -6
Maybe the bulb is half blow? My high beams went out too. But low still worked. Then I would smack the light and it would turn on but cut off shortly after... Now its the opposite way low wont work but will when smacked, but high work.
|
|
Doc's Anything Goes
Currently Offline
Posts: 536
Likes: 20
Joined: Mar 27, 2013 21:20:02 GMT -6
|
Post by davec on May 20, 2013 10:11:15 GMT -6
....... wont work but will when smacked, .......... Kinda reminds me of my ex wife |
|
..BAD TO THE BONE..
