Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Oct 23, 2013 21:23:13 GMT -6
Hey Guys! I recently got my Vento Triton 50 running great after a new carb. I also ordered a Jet kit and UNI Foam Filter. The parts came in about 3 days ago, and I took the carb off to put the new Jet in, and realized, it had already been upgraded to .95. The only other bigger one that came in the kit was 1.00, so I went ahead and threw that one in there. I put the carb back on(after cleaning EVERYTHING very well, I also let the PILOT JET sit in carb cleaner for about 2 hours, as I was having a take off issue). I then took the Air box off and clamped the new UNI filter on. It STILL wanted to hesitate on take off, AFTER the carb tuning. I took the carb back off and moved the needle ALL THE WAY DOWN, to the bottom notch. Fired it up, and with the Valves at .005 for intake and exhaust, I hit a solid 42MPH GPS Confirmed. I am very happy with my results, I also went ahead and sanded it down and Spray Painted it black...NOT the Best, but alot better than Sun Bleached! Few other upgrades too(12volt Socket, 250watttAmp 5x7Speakers, Cup holder/Organizer, 12volt 12AMP Hour BATTERY). Attachments:
|
|
Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Oct 23, 2013 21:29:17 GMT -6
BLACK SPRAY PAINT One Coat... Just wanted to see how it would look if I did this, Im going to coat it again, and clear coat it. Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 233
Likes: 1
Joined: Sept 20, 2013 5:54:44 GMT -6
|
Post by markwb on Oct 24, 2013 3:57:45 GMT -6
Looks good, mikey!
|
|
Scooter Doc
Currently Offline
Posts: 274
Likes: 1
Joined: Aug 25, 2013 21:40:53 GMT -6
|
Post by mikey34 on Oct 26, 2013 9:25:05 GMT -6
Thanks alot Mark!
I LOVE your headlight!!!
|
|