Lighting problems are now a NO Start condition By forcefed44 (Read 656 times)

[forcefed44]

Nov 15, 2013 19:09:11 GMT -6 tvnacman said:

Chriss , I will be around in the morning , let me know if you want to come .

John

Thanks John for you local parts supply and meet up.

Continuing with the story, Long story short it's running and stronger than it's previous situation. The problem lay within the wiring; with a melted ground, bad stator pickup, ground pole on the stator winding, and insufficient gauge positive side wiring to plugs. All this from just a bad stator meltdown.

So what I did was, A lot of pinout testing and I installed a good sourced 8 pole stator, a DC ignition/AC charging performance CDI.. (Yes there are dual phase scooters out there). and a new high brow Gel battery and the scooter fired up and idled stable throughout the 10 min warm up. Gauge is a bit off as is states charging at 13.6 but on an actual meter reads 14.4V. Not a big concern of mine now. With everything I replaced parts wise... This thing is pretty much new sans the body!!! LOL

Thanks,
Chris M.
Black Art Bikes