2008 MC-16 50cc (ROKETA GY6 50cc) By mikey34 (Read 727 times)

[mikey34]

Hey Guys!

Just got this sweet retro in! I think it looks real nice! Roketa did a good job on this one. Anyway, the problem is, A Broken Ignition Switch.

The key WILL NOT, turn All the Way Right, or to the ON/RUN Position.



This one from Scooterparts4less.com, I BELIEVE is the right one, It is a 4 PIN PLUG(WITH ONLY 3 PINS) and a loose wire with a connector. If I am correct, then the [RED, BLACK, GREEN, BLK/WHT] Are Ground for CDI, one for starter solenoid, and what are the other 2 for??

Thanks alot guys!!

[Guitarman]

If it is the correct one, then when you open it up, you'll see where the other wire goes. Connector to connector.

[mikey34]

I have, and its the right plug, and wires, I'm just afraid it won't fit in the hole where it sets on the body....

[mikey34]

Hey guys, So While I wait for this Ignition Switch, How do I "Hot Wire" this thing?!?

I would like to start it, that way I can see if there is anything else wrong with it, BEFORE, I get the ignition switch in the mail. That way I can get a jump start on the repairs...

What wires need to make ground and so forth is what I am wondering, with out just trying touching wires and burning something up!!!

Thanks in advance guys!!