Broken clutch? By necorum (Read 653 times)

[necorum]

2005 CPI Oliver City 2T 49cc

Ok, on my way home from school today my scooter started acting up. i lovst top end and felt like something was rubbing my rear wheel. I made it home, and upon taking off my CVT cover I found a spring had came off my clutch (bell housing?). Can anyone explain my next course of action? Is it repairable?

[Alleyoop]

It may have just come off BUT I doubt it, Most likely a piece broke off where the spring hooks onto. And that requires a NEW CLUTCH.
Alleyoop

[necorum]

What I figured. I'll take it off and check here in a little while.

7,000 miles and really only a clutch breaks. Not to bad

www.racingplanetusa.com/clutch-adjustable-evolution-racing-110mm-p-16112-1.html?cPath=2948_2954_2958&sessID=62bc0598bc6e72b63857d935a799c675#.Uo6Jf8Sfj6c


will that work?

[Alleyoop]

Check If your scooter is in the list of scoots that they say it will fit.
Alleyoop

[Bashan]

It will probably work but I'm fuzzy on 2Ts. As the venerable Alley said, call and ask to make sure. You noticed they're out of stock? You might try one of the guys in the banner rotation at the top of the site. You'll have to deal with the torque spring and I made a device to help deal with that. Check your bell housing and reduction shaft to make sure they're not scored up. The remnants of a spring in there can cause a lot of damage. By the way, the part that you're going to order is technically called the clutch driven plate

[necorum]

Will do

[Bashan]

Wow, you're going to do what I say??!! How about talking to my kids for me? Please, I mean PUH-LEASE!

[shop242]

That spring looks Sprung to me ! Im screaming rear clutch pack