Clinician
Currently Offline
Posts: 1
Likes: 0
Joined: Mar 23, 2014 9:14:33 GMT -6
|
Post by diniki on Mar 23, 2014 10:34:10 GMT -6
Brand new and IN A Fix... I have looked at dozens of Ytube and other links and the more I look the more frustrated I'm getting.
I bought a used 2008 Chuanl 150cc LB150T-12 and it won't start. I took it apart, but my phone flipped out and I lost all the pics I took of how it was assembled. After 2 long days of trying, I managed to put in a NEW carburetor, air hose and a new battery. Now turns over and stutters, but still won't start.
I noticed that the pink air filter box had quite a bit of oil in it and that the little sponge made to the bottom of the actual filter is full of oil. Is this normal? If not, how (in 'dummy language') do I fix it? Can this make it not run?
If not, can help with this also? I woud really appreciate it, because I need it to run to get back and forth to work!...I finally found a job and it's my only transportation, so I need to fix it (myself) fast!
A face full of gasoline taught me I have to somehow clamp off the hose from the tank to the fuel pump before I try to replace that, but first...do you think this will make it run?
And...I need to change the oil...How? Do I just unscrew the big bolt in the bottom to drain then refill? And I read somewhere that I only use 0.9 Liters of oil, is that true?
One more thing... I also noticed (too late) there is no muffler and the parts store said I can't run it on the street without it, so have to put that on too. Any tips (in dummy language please) on how to install the New muffler?
Please HELP!
|
|
|
Post by Alleyoop on Mar 23, 2014 12:25:06 GMT -6
Here is your scoot: Here is the exhaust system: AND DO NOT RUN IT WITHOUT the muffler it will damage your EXHAUST VALVE or worse and you will be in a world of hurt. The motor is having a hard time running due to no back pressure due to no exhaust system on it. This is the first thing you need to do and while waiting for the exhaust to come you can do the oil changes and clean up the oil in the air box and clean the oil filled filter. Oil in the foam Filter: Take the foam out and use dish soap clean it and let it dry then put it back on. The exhaust system: www.ebay.com/itm/Chinese-Scooter-150cc-Gy6-Jonway-moped-scooter-150T-12-Exhaust-Muffler-/271064462980?pt=LH_DefaultDomain_0&hash=item3f1cb37684How to change the oil: Alleyoop
|
|
|
Post by jvino on Mar 23, 2014 13:59:04 GMT -6
yeah that sounds pretty good advice. I would take that sounds good.
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 23, 2014 14:05:14 GMT -6
|
|