Clinician
Currently Offline
Posts: 48
Likes: 1
Joined: Nov 13, 2012 11:07:03 GMT -6
|
Post by helix803 on Mar 29, 2014 16:58:42 GMT -6
I got my old JMStar started and running. I've got the engine wired, but the dash wiring plugs were not at all a match for the harness. Colors are all different and the plugs are different. Where can I find a diagram for the dash circuit board? I need to find out how to wire the tach and the fuel gauge plus the indicator lights.
|
|
|
|
Post by Alleyoop on Mar 29, 2014 17:22:19 GMT -6
What year is the scoot, also a picture of the instrument panel would help and the back of it.
Alleyoop
|
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Mar 29, 2014 17:48:48 GMT -6
are able to get any circuits wired ?
John
|
|
Clinician
Currently Offline
Posts: 48
Likes: 1
Joined: Nov 13, 2012 11:07:03 GMT -6
|
Post by helix803 on Mar 29, 2014 20:59:37 GMT -6
It is a late 2008. I've the switches figured out and I am pretty sure I can figure out the dash lights. It is the pinouts on the tach and fuel gauge I need to know.   |
|
Clinician
Currently Offline
Posts: 48
Likes: 1
Joined: Nov 13, 2012 11:07:03 GMT -6
|
Post by helix803 on Mar 30, 2014 17:11:29 GMT -6
Well, I got the tachometer wired and working. For the life of me I can't get the gas gauge to work. The sensor could be faulty or my wiring could be wrong.
|
|
|
|
Post by Bashan on Mar 30, 2014 19:45:36 GMT -6
What wire did you use for the tach? Did it come off of the CDI?
Your sensor usually has a blue/white, blue/yellow, and a ground. The gauge usually has the two blue with tracers wires and a black power source. What color wires are off of your gauge?
|
|
..BAD TO THE BONE..
