Speaking of belts By cyborg (Read 757 times)

[cyborg]

Hey alley what belt would you recommend for my et4? Gates?,,,kinda seems silly to put a kevlar belt on one of these things as they make no horsepower,, and i don't see kevlar helping with wear just stretch,,,maybe i'm wrong,,,thoughts?

[jvino]

Sorry cborg I don't really no much about the belts.

[Alleyoop]

I personally like BANDO they have more material from top to bottom. I have both and the bando sure wears good and I hotrod with my Trike, I am not easy on it
Alleyoop

[twowheeler]

Why do some scoots specify specific numbers but most places round off the numbers, especially the middle and end. I take a 17.5 x 28 and most sell 18 x 30 How much of a difference is that performance wise? Id like a longer belt but i take a 723 and the next size up is like 729

[Alleyoop]

The really import numbers are the length and the angle, the half on the width will not make to much of a difference. You can use a 729 over the 723 that is just a hair longer which will help a little on your top end.
Alleyoop

[cyborg]

thanks i think that thickness and depth are the most imortant numbers,,,i mean with the correct length of course because it drives from the side ,,,bando it is,,thank you

[twowheeler]

I decided to try a gates and the 724 gates was shoter than my 723 Bando and the parts company found all the 724s they had were not measuring correct so they sent them back to the manufacturer. But i will say even though is was too short it was silky smooth!

I just hate the fact that the Bando is so easy to counterfeit. Anyone can paint the logo.