Clinician
Currently Offline
Posts: 23 
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 20:30:53 GMT -6
Alley,
At idle both yellow and white are 20-22vac fluctuates. Is my setup compatible with 11 pole stator if i will upgrade? Do i have to change the reg and cdi too?? Some forums that i been reading some people say at idle the white and yellow are atleast 20vac somewhere around there..it is confusing really lol
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 20:15:45 GMT -6
Bashan - stator unplugged from the main harness, white and yellow together 5.2vac 4000rpm. White to ground 40vac 4000rpm and white same as the yellow at 4000rpm
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 19:25:28 GMT -6
Thanks Alley!
Its a 2007 ARGO AR150-2 150cc chinese made. It had an 8 pole stator. The weird part is the regulator that came with it.it has 6 wires and the pink wire is the only one that doesnt match among all the wires on the diagram..
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 19:17:16 GMT -6
I attached a copy of the manual technical specs of the scooter. Does this mean that my stator is bad? 20-22v on idle and around 40v revving it to 3000rpm or is it another bad regulator..? I am totally lost and I do feel I wasted my money buying this scooter..  |
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 18:53:29 GMT -6
Thank you for the quick reply you guys! I dont understand why from the factory and on the manual says they are 55w. Because i bought the scoot used and i have no clue if this is an existing problem from the day the scooter got purchased..one more thing that i notice is when i disconnect the red wire with the 7amp fuse i am only getting 2.6- 3.3v when i rev it. Is it supposed to be atleast 13v ?
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 18:31:24 GMT -6
I diconnected the headlights and the voltage seems to go up 1 volt everytime i rev it. As soon as i connect the head lights the reading on the battery drops down really quick..right now headlights disconnected and im getting 12.75v and climbing everytime i rev it..headlights connected 12.19v then it goes down 1 volt at a time. My headlights are 55w
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 18:26:11 GMT -6
Alley - multi set to ac, yellow 36v 3000rpm and white 42v.
Bashan - multi set to dc and i am getting 12.62v
|
|
Clinician
Currently Offline
Posts: 23
Likes: 0
Joined: Jul 20, 2014 21:38:19 GMT -6
|
Post by jun on Jul 28, 2014 18:00:36 GMT -6
First time posting here. Here is my situation, I have a 2007 ARGO AR150-2 150cc scoot that i had just recently purchased used. Battery seems not charging because every other day i have to put the battery to the charger to start my scoot. I just recently purchased the battery from autozone a week ago duralast etx9 for $90..and just installed a new reg/rec. The old regulator that came with the bike has 6 wires, red, black, white, yellow, pink and green and i got the same replacement reg with the same color coding. i did a stator test and green= 0, yellow = 22V and white 20v all on idle. and still the battery seems doesnt charge..Can anyone please guide me to the right direction..here is a copy of the wiring diagram of the scoot.  ![]() |
|
