Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Oct 2, 2015 12:59:34 GMT -6
via mobile
Post by daddyof7 on Oct 2, 2015 12:59:34 GMT -6
Yes black wire is 12volts. Will double check when I get home from work. And I switched those wires around this morning with no luck. Any chance you live close to Joliet area?
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Oct 2, 2015 6:13:12 GMT -6
via mobile
Post by daddyof7 on Oct 2, 2015 6:13:12 GMT -6
Red white wire .210vac blue white wire .080vac
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Oct 1, 2015 18:50:43 GMT -6
via mobile
Post by daddyof7 on Oct 1, 2015 18:50:43 GMT -6
Which wire should be checked
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Oct 1, 2015 18:43:47 GMT -6
via mobile
Post by daddyof7 on Oct 1, 2015 18:43:47 GMT -6
Ok I will check that ac voltage. I put the new cdi box in still no spark
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 29, 2015 22:31:46 GMT -6
via mobile
Post by daddyof7 on Sept 29, 2015 22:31:46 GMT -6
I do agree with you. I ordered the new cdi box. Is there a signal that comes from pick up coil and magneto that tells me yhey are in good working order? By the wsy I appreciate the help I can rebuild a car with my eyes closed but this for some reason I can't rap my head around its function.
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
headache
by: daddyof7 - Sept 29, 2015 8:35:35 GMT -6
via mobile
Post by daddyof7 on Sept 29, 2015 8:35:35 GMT -6
Is there a way to keep a thread going that is more than week old?
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 28, 2015 19:22:09 GMT -6
via mobile
Post by daddyof7 on Sept 28, 2015 19:22:09 GMT -6
Ok well it was cheap enough to try but wasn't the problem I guess . This scooter is turning into giant headache. Still no spark. Is there anybody that can give me a flow of diagnostics to pin point problem part? Im not sure what signal comes from pick up coil both wires stay ground when cranking. Are there any fuses that could blow. I would assume im missing something here
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 27, 2015 11:36:15 GMT -6
via mobile
Post by daddyof7 on Sept 27, 2015 11:36:15 GMT -6
Got pick up coil today wish me luck
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 22, 2015 7:53:30 GMT -6
Post by daddyof7 on Sept 22, 2015 7:53:30 GMT -6
Ok black/yellow wire has battery voltage with key on. Blue/white wire and red/white wire are always ground key on or off. Cdi box measures 1 1/2 x 3. The original one I took off measures the same. I do see a little melted spot on case of cdi box though. What should I be getting off those wires from pick up coil? Any other tests I can run to figure out what actually the problem part is? Sorry to be rushing just want this project over.
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 22, 2015 5:59:03 GMT -6
Post by daddyof7 on Sept 22, 2015 5:59:03 GMT -6
Have funn on your vacation. Any info you can give me today would be great appreciated. I will be out in garage after kids go to school. Im assuming that all should have dc volts.
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 21, 2015 18:05:06 GMT -6
via mobile
Post by daddyof7 on Sept 21, 2015 18:05:06 GMT -6
The power to the coil wire stayed grounded along with the trigger feed wire. Wish you live close to me I'd bring it by you.
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 21, 2015 18:00:49 GMT -6
via mobile
Post by daddyof7 on Sept 21, 2015 18:00:49 GMT -6
Yes black wire has 12 volts. I disconnected the red / white wire ( it was a ground) but still no spark
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 21, 2015 18:00:05 GMT -6
via mobile
Post by daddyof7 on Sept 21, 2015 18:00:05 GMT -6
Yes black wire has 12 volts. I disconnected the red / white wire ( it was a ground) but still no spark
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 20, 2015 20:09:03 GMT -6
Post by daddyof7 on Sept 20, 2015 20:09:03 GMT -6
Never mind I just saw it
|
|
Clinician
Currently Offline
Posts: 49
Likes: 1
Joined: Aug 15, 2015 20:15:36 GMT -6
|
wired
by: daddyof7 - Sept 20, 2015 20:08:00 GMT -6
Post by daddyof7 on Sept 20, 2015 20:08:00 GMT -6
This is only diagram that was half way accurate only difference is pick up coil has two wires. How do I know if im dealing with ac or dc volts?
|
|