Clinician
Currently Offline
Posts: 25 
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Jan 16, 2017 14:59:41 GMT -6
Looks like the enricher is not working, thanks.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Jan 16, 2017 14:58:59 GMT -6
In our library is a check for your enricher.
Thanks. It would seem my enricher is not working. Took it out cold and it was extended already, pushed it back in to see if it was stuck and it just popped right back out. Guess I'm looking for parts.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Jan 16, 2017 13:42:37 GMT -6
Thanks for the response. It's not doing anything so I checked for power, which it does have as soon as I turn the key on. However it sure does nothing to aid starting.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Jan 16, 2017 13:39:51 GMT -6
Seems to work in reverse. Hard to start cold with a very low idle until it warms up . The warmer it gets the faster the idle. Thank you for responding.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Jan 16, 2017 10:59:12 GMT -6
Hello all. Need an answer form one of you great people. My enricher does not seem to be working, I had read on an old post here that it should get power when the motor starts. Mine gets power as soon as the key is turned on. Is that correct or wrong. Trike is a 2015 300cc tornado with the linhai motor. Thanks to anyone for the help.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Dec 8, 2016 12:06:33 GMT -6
Many thanks for the help. Appreciate it.
JD
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Dec 8, 2016 10:37:01 GMT -6
I found a very easy way to bleed the system. The Yamaha 250 YP has a bleed screw at the carb , the Linhai no. There is a small water hose going to the Linhai carb, so I removed one end and filled the system until coolant came out, replaced the hose , topped the system off and it worked just fine. Ran about 15 minutes, shut down, let cool and topped off. Everything is working fine now. Thanks for your responses.
JD
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Dec 8, 2016 8:09:03 GMT -6
Thanks for the response. I will hold off. Been burping this thing a lot. Too bad they don't come with a bleed screw like the Yamaha.
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Dec 7, 2016 17:53:12 GMT -6
I have pretty much googled myself out. Can not locate a cooling system diagram for a Lanhai, Yamaha yp 250 or any other Chinese scoot, wow. The only diagrams I could find are not really for my scooter, however they all do show the lower radiator hose going to the water pump. Guess I will take a chance and reverse the hoses on mine and hope I do no damage.
JD
|
|
Clinician
Currently Offline
Posts: 25
Likes: 0
Joined: Nov 30, 2016 20:19:34 GMT -6
|
Post by vlxerdon on Dec 7, 2016 15:47:20 GMT -6
Hello all. New here and to scooters but not to motorcycles. Been riding many years, wife and I are both 71 now and wife , due to some physcial problems, is no longer able to get her leg high enough to get on the bike with me . We have been riding our entire married life and miss it very much. To that cause , Bought a 2015 Icebear tornado trike for her. It has sat for over a year. Only had 5 miles on it when I bought it. I have gone over it very well changing all the fluids and greasing ,lubing and tightening everything I could find. I have a question I hope someone here can answer for me. The trike is overheating . I have a new water pump and pump to block tube on the way. My question is what hose from the radiator should be going to the water pump. On a car the lower hose generally goes to the water pump and the upper is going to the thermostat. One the trike it is just the opposite. I am asking because when taking the lower hose from the pump ,nothing drains out. I would think with the radiator drain being in the pump, removing that hose would drain the radiator as well. Hope someone can help me. Thanks in advance.
JD
|
|
