Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 20, 2011 7:06:27 GMT -6
|
Post by chris423 on Oct 4, 2011 18:45:32 GMT -6
i will try that and let u know what happens,and i dont care how long the proccess takes long as it runs..
thanx guys..will starter fluid work?and is 150psi compression ok,or is that too much?
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 20, 2011 7:06:27 GMT -6
|
Post by chris423 on Oct 2, 2011 19:26:54 GMT -6
rich and sprocket..thank yall for ur time and help..chris
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 20, 2011 7:06:27 GMT -6
|
Post by chris423 on Oct 2, 2011 19:25:46 GMT -6
thanx guys..i have checked the ac voltage from the motor,the red wire is like 90v ac and the blue was like .9v ac..and my motor is gronded good or eles my electric starter would not work well enough to turn the motor over,and i have a really strong blue spark..im normaly pretty good at this stuff but im at a complete loss..the reason (maybe) i went throygh 3 CDIs is that one was the original and the second was a friends and his scooter didnt run iether and the 3rd wich worked i bought new..but as i say i have sufficient spark i think, and there is plenty of fuel on the plug..i have too much time in this thing to give up on it now..
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 20, 2011 7:06:27 GMT -6
|
Post by chris423 on Oct 2, 2011 12:38:08 GMT -6
i have a 2004 50cc odes scooter,,i went through 3 cdi boxes,finally have spark,,and plug was dry tried cleaning card plug was still dry, bought a new carb and have fuel on the plug seems maybe a lil too much,,have checked electrical timeing and mechanical timeing and valve tentioner bolts and have 150 psi on my compression check, all is good..but still wont start..it pops like a small backfire but just wont start..plzzz help..thanx much..
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 20, 2011 7:06:27 GMT -6
|
Post by chris423 on Sept 28, 2011 9:04:34 GMT -6
hey guys thanx and sry i havent repled..i have went through 2 more cdis and finally got spark..then i was getting no fuel tryed cleaning the carb and still no fuel..got a new carb and now may be getting too much fuel i have fire plug is wet have checked electronic and mechanical timeing and all is good but still wont start???i am at a complete loss..
|
|
