Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 23, 2012 15:07:25 GMT -6
|
Post by fits on May 17, 2012 9:27:23 GMT -6
Praise HIM ! On the back of the CDI there is a loop of green wire, That wire circuit restricts the revs. We clipped that wire and the Adly winds up 9,500. I recall reading somewhere else that rev limited CDIs could be disabled this way. Does anybody know more about it?
Best regards
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 23, 2012 15:07:25 GMT -6
|
Post by fits on May 17, 2012 1:21:55 GMT -6
|
|
Clinician
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 23, 2012 15:07:25 GMT -6
|
Post by fits on May 16, 2012 14:52:36 GMT -6
This two cycle, 286 miles on it, will not rev above 6,200 rpms. We have changed the plug, new NGK, drained and replaced the fuel, disasmbled, cleaned and re-installed the carb, secured all air intake hoses and, adjusted the air/fuel screw from compleatly closed to four turns out. Still no joy. Sixty-two hundred rpms only. Oddly enough, another Adley Moto came in and it wound up 9,500 no sweat. Any ideas?
|
|
