Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 19, 2012 22:09:20 GMT -6
I will shoot one up here tomorrow when I get off work!! Would like to resalve this by the weekends end!! Thanks for all your help folks!!!
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 18:48:51 GMT -6
Yep that's it!! All the way all day long!!!! Driving me nuts had to walk away for the day and drink a beer!!! Lol!!
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 14:10:29 GMT -6
Mine is simaler but my drive belt isn't on the same side of the motor!! Someone told me its a Chinese motor but a motor is a motor and usualy I can make anything run but this starter is driving me nuts!! It is in the hole for the cover or it wouldn't go on! It has to fit! Or it won't fit! You know what I mean!! I'm just going to keep testing and trying I don't know what else to do! I'm not the type to just quite!! Know what I mean!! Thanks for your time and ideas if you have anymore let me know please?  ?? |
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 13:08:10 GMT -6
That's what I'm saying? Thought someone would have an idea?? What would an inerlock switch look like? I'm learning about these things as I go? ? So any insure is great!!! |
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 13:07:34 GMT -6
That's what I'm saying? Thought someone would have an idea?? What would an inerlock switch look like? I'm learning about these things as I go? ? So any insure is great!!! |
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 12:24:32 GMT -6
Yes it still drags a lil without the plug in but not as bad!!! The starter is putting out the right voltage and I grounded it to the frame now so I'm really at a loss???
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 10:32:36 GMT -6
Yes the starter is on the outside to the cvt cover to the left and the kick start disengaged seem to be pressing on anything that was the first thing I cheaked out! I have no clue either that's why I'm here!!! Hope someone has a clue but thank all of you for your time and help!!! Really!!!!
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 18, 2012 9:48:29 GMT -6
I've got an 8 awg for the ground wire!!! And like I said it works fine with the cover off just when you put it pack on it starts! I greesed the reduction gear and the sleve that goes in it I'm at a loss too!!!!
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 17, 2012 20:06:22 GMT -6
It's a 150 and it turns over it just drags real slow but works fine without the cover but drags real slow after a full revalotion? I don't get it!!!
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 17, 2012 14:21:38 GMT -6
|
|
Clinician
Currently Offline
Posts: 10
Likes: 0
Joined: Jul 17, 2012 3:50:36 GMT -6
|
Post by spnov on Jul 17, 2012 4:06:07 GMT -6
I got a gy6 and the starter works fine unrolled I put the case cover back on  ?? It's for my stepson and we have been working it together and he is bumed out over it!!! Don't know what would cause this? I'm good with all motors and I'm stupefied??? I know someone up here can help or give me some ideas!! Anything would be awesome and will be very apreciated!!!!!! Thanks for help and looking!! |
|
??