Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 14:11:01 GMT -6
thanks alley and john you two have been alot of help ill update this tonight after i remove the carb
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 14:10:32 GMT -6
cool ill take the carb off tonight when i get home and see if i find anything... will be very awesome if this is the problem seeing how i was buying a new carb from John anyway.... been very depressing days without my scooter.... spent $4.80 to goto work a week on the scooter... cost about $75.00 a week in my truck...........
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 11:44:47 GMT -6
also yes the guides were on there i even changed them out and put on the old ones to try that and changed out the ramp to see if the new ones angle was doing it still same result.... im starting to feel more like john was right and its either a vaccum or fuel issue
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 11:42:37 GMT -6
will try that when i get home tonight and will video it also
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 9:41:06 GMT -6
on videob when i was reving and it was about to die i let off and it idled again then i reved 2nd time and it died.... videoc i just reved and let it die.....when i get home should i take off the entire variator and belt and try and rev it?
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 9:39:12 GMT -6
here are more videos tried to hold the phone better angle....
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 9:30:09 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 17, 2012 9:23:59 GMT -6
If I take the belt off the variator opens up cuz nothing there to stop it from opening fully and weights falling out
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 21:52:18 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 21:20:05 GMT -6
Maybe john is right and its a vaccum leak?
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 21:17:19 GMT -6
I will make another video when its daylight the tire doesn't move dunno why it did in that video after it died it didn't spin the next time
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 21:15:09 GMT -6
Mine stays near the center of the variator never gets larger in front and smaller on clutch...the variator slides till I put on the belt then I can't tell cuz there is no slack the belt stays at the edge of the clutch and near the center of the variator
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 20:24:09 GMT -6
Guess I'll buy a new clutch after I get this carb from john I will change every hose and see if any change
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 20:15:02 GMT -6
Well I took off the variator and everything seems fine I put graphite all over it and put back on same thing took it off again and put in the old variator slides and plate goes up to 3k rpm and shuts off I pulled the clutch off the pads are pretty rough but all the springs seem to be attached but didn't have a tool to get the big nut off....I really don't get it
|
|
Certified Clinician
Currently Offline
Posts: 97
Likes: 0
Joined: Sept 14, 2012 10:53:12 GMT -6
|
Post by mself52 on Sept 16, 2012 13:38:01 GMT -6
try now i think i fixed it
|
|
