Clinician
Currently Offline
Posts: 19
Likes: 0
Joined: Apr 18, 2013 11:24:46 GMT -6
|
Post by narib414 on Apr 19, 2013 13:55:30 GMT -6
I was wondering, how to I increase the pressure for my back brake? It feels very soft and I basically need to squeeze it almost all the way before it engages. Also, I've been noticing that when I apply my front, I get a rubbing noise, almost like the tire treads are rubbing on the fender. But I only notice it when I'm riding, not when its parked and I try to manually spin the tire and apply the brakes.
|
|
Clinician
Currently Offline
Posts: 19
Likes: 0
Joined: Apr 18, 2013 11:24:46 GMT -6
|
Post by narib414 on Apr 19, 2013 7:41:42 GMT -6
Sweet, ty very much for the info:-)
|
|
Clinician
Currently Offline
Posts: 19
Likes: 0
Joined: Apr 18, 2013 11:24:46 GMT -6
|
Post by narib414 on Apr 18, 2013 12:01:02 GMT -6
also my scooter is at 450 km, and the manual states to clean the air filter, as this being my first time doing so, what should I do to properly clean it?
Safe riding and may the wind be at your back
|
|
Clinician
Currently Offline
Posts: 19
Likes: 0
Joined: Apr 18, 2013 11:24:46 GMT -6
|
Post by narib414 on Apr 18, 2013 11:51:36 GMT -6
Hey all. I wanted to take time to introduce myself, names narib, and I just picked up a taotao 50 scooter a few weeks ago, due to needing transportation to a new job. I've been mining the forums for advice and tips on basic maint for my scooter (due to the fact that I don't know jack and id rather look like a moron and get the answer than try to work on it and look like a moron breaking it). I had a few questions that I need help clearing up.
1.) Iver the weekend I was finally able to get enough money to perform oil and gear oil change plus swapping out the spark plug. After doing so, I thought to throw in high grade gas, but noticed that the scooter appeares to have lost 5 mph off of acc and top speed. I threw in reg gas the other day and it seems to have come back but the acc is down a bit. Now when I did the oil changes, I filled up the gear oil till it basically was dripping out of the hole and the oil to where it was near the top of the thin part of the stick. Did I over fill either of those? The manual stated not to screw in the dip stick which is what I went by to check the oil lvl.
2.) When I swapped out the spark plug I noticed the stock one was black. I read that is a spark plug is blackened, it means the engine is running rich. What does that mean, and how do I fix that?
3.) The manual called for 15w40 for the engine oil which I used. Is this ok to make use of in the scooter? Or should I use another oil mixture?
4.) I peered around my scooter to see what I could do to derestrict it but so far I've yet to fiind the fabled "pink" wire and there does not appear to be a washer of any kind on the belt drive that I've read about.
5.) I live in ct so the landscape is fairly hilly, and the scooter bogs down to 15 20 mph going up hill, what can I do to increase the acc in it? I've seen performance upgrade packages but I really don't want to spend more than 300 350 in parts for upgrading it, and I just want to concertrate on its acc. The top speed is fine for now, but wouldn't mind a extra 5 10 mph tacked on if I can.
6.) Finally, I've noticed that it has been having a rough time starting up, takes three to five trys to get it to kick over, some times I need to resort to kick starting it. Would this be because of the spark plug or maybe because of the battery?
Thank you all for your time and paitence in helping me and answering my questions. Safe riding, and may the wind be at your back.
|
|
