Clinician
Currently Offline
Posts: 20 
Likes: 1
Joined: May 23, 2013 8:20:14 GMT -6
|
Post by carefulrider on Jun 13, 2013 13:30:45 GMT -6
I didn't think of filtering an eBay search. Thanks again.
|
|
Clinician
Currently Offline
Posts: 20
Likes: 1
Joined: May 23, 2013 8:20:14 GMT -6
|
Post by carefulrider on Jun 11, 2013 8:34:20 GMT -6
Okay, Thanks much.
|
|
Clinician
Currently Offline
Posts: 20
Likes: 1
Joined: May 23, 2013 8:20:14 GMT -6
|
Post by carefulrider on Jun 7, 2013 8:05:52 GMT -6
My 2007 LB150T-12, SUNL ADVENTURE 150cc has such a hard ride, that I should like to buy a pair of used air/nitrogen-filled adjustable shock absorbers to try & make the ride comfortable. Below is a list of the dimensions of the existing standard stock shock absorbers on my scoot. So I presume I would need a pair quite close to those dimensions.
OAL : 14¼ " or 14.2500" or 360 mm
EYE 2 EYE: 13-3/16" or 13.1875" or 335 mm
DIA : 2 " or 2.0000" or 50 mm
EYE DIA : 7/16 " or .4375" or 11 mm
|
|
Clinician
Currently Offline
Posts: 20
Likes: 1
Joined: May 23, 2013 8:20:14 GMT -6
|
Post by carefulrider on May 31, 2013 7:03:54 GMT -6
Thanks all:
I have succeeded in removing the race. Interestingly enough, the old bearing slid off the steering stem. The replacement bearing's inner diameter is .003" smaller than the steering stem's diameter. So I am filing/sanding down the stem in order to allow the bearing to slide on to the seat.
As you have said: sometimes the race fits in such a way as it will come down with the bearing. In other instances the race is press fitted into the housing. I am finding out that the same is true of the bearing.
Thanks again for the ideas & suggestions.
|
|
Clinician
Currently Offline
Posts: 20
Likes: 1
Joined: May 23, 2013 8:20:14 GMT -6
|
Post by carefulrider on May 23, 2013 10:23:42 GMT -6
Hello All:
I have a 2007 LB150T-12, SUNL ADVENTURE 150cc with 10,500 miles on it.
The handlebar began to get sticky in the straight-ahead position. Upon disassembly I discovered that the steering stem lower bearing race is worn & needs to be replaced.
Any suggestions on how to remove the race?
Thanks in advance.
|
|
