Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 3, 2013 16:12:15 GMT -6
|
Post by freebrock on Sept 8, 2013 17:32:29 GMT -6
Thanks for all the help everyone, got it going great now !!
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 3, 2013 16:12:15 GMT -6
|
Post by freebrock on Sept 8, 2013 8:07:45 GMT -6
Did the valves, adjusted them to .003 gap. Starts and runs great at an idle, but still bogs at full throttle. Thinking I need to adjust the mixture on the new carb I installed. I don't know where this one is currently set at. Any idea where the mixture screw should be set to run properly ?
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 3, 2013 16:12:15 GMT -6
|
Post by freebrock on Sept 5, 2013 18:51:24 GMT -6
Thanks everyone. Looks like I'm going to do the valves and we'll see what happens from there.
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 3, 2013 16:12:15 GMT -6
|
Post by freebrock on Sept 4, 2013 16:32:21 GMT -6
Considered that, just wanted to try everything else first because of how well it runs when it first starts.
|
|
Clinician
Currently Offline
Posts: 5
Likes: 0
Joined: Sept 3, 2013 16:12:15 GMT -6
|
Post by freebrock on Sept 3, 2013 16:22:54 GMT -6
My sons 49cc Taotao VIP Future Champion will start fine and run smooth for about 30 seconds, then it just shuts down. I can feather the throttle to keep it running a little longer, but will still shut down after a minute or so. I replaced the carb with a brand new one, new spark plug, new CDI, tried bypassing the fuel valve, but no change from any of these. Any suggestions would be greatly appreciated !!
|
|
