150cc gyc clone scooter parts missing and loose By heruk (Read 1,297 times)

[heruk]

I bought a 2012 150cc scooter last night and it runs fine atm but some parts are missing. Also there is a tube of some sort hanging off the side of the bike.

[Bashan]

That is your carb drain tube. You will find a screw in the end that if you take it out the gas in the carb will run out. You need to do two things. Take that screw out, let the gas drain out, let everything dry, then use some locktite to make sure that screw doesn't come out while on a ride. Number two, attach that metal cylinder that the screw is in to a bolt on the CVT cover or any convenient place, it doesn't matter, just don't let it flop around down there. If that hose gets cut, or the screw falls out, your ride is over since all the gas will drain out of the carb. When you restart your bike after the repair, you'll need to crank in five second bursts until the bowl fills back up and then it will start. If you go to "air, fuel, and carb" in the Library there's extensive information on this and many other subjects.

[heruk]

Wow That's detailed thanks. I'll go check it out now. What about those 3 missing bolts over the top of the CVT cover?

[jct842]

Take out one more and go to a hardware store and match it with three more. they are metric

[adamhoyer]

www.scrappydogscooters.com/125_150_4-STROKE_PARTS.html ctrl+f 125/150 belt cover bolt set pick long case

[jvino]

Welcome to the sight you made a good purchase I believe those are pretty well none scooters and pretty dependable to change the oil and do basic work on it it should last many miles.

[heruk]

Thanks Guys!

[heruk]

Can any of you identify the make and model of this thing?

[adamhoyer]

s

[adamhoyer]

www.extremescooters.biz/roketa-mc-23-150cc-scooter.aspx thinking this one

[Alleyoop]

It is your basic chinese 150cc ROKETA scooter limited edition superscooter. They give them different names and usually change the plastics a little every year and call them something else.
Just google for roketa limited edition superscooter and you will get hits.

Yep that is it just little different plastics is all.

Alleyoop

[tvnacman]

In your video I only see one missing screw . The one to hold the carb drain end in place .

John

[heruk]

Thanks Guys that's a lot of help since i need to buy the right lock set.

Jun 22, 2014 10:20:18 GMT -6 tvnacman said:

In your video I only see one missing screw . The one to hold the carb drain end in place .

John

Really? At 36 seconds in the video it looks like a big component of the bike is missing.

[Alleyoop]

You just have a couple of bolts on the CVT cover missing but that is no big deal, you have several holding it on. On mine it takes 8 bolts I only put on the 4 middle ones to hold the CVT cover on two on top and two on the bottom. It is just a debri cover and for safety from the turning parts.
But you can get the whole set of bolts from scrappy and put them all on if you want and you will have spares.
Alleyoop

[jct842]

What does the title say as far as make? Also the serial number will indicate who put it together.