Clinician
Currently Offline
Posts: 31 
Likes: 0
Joined: Jun 29, 2014 11:31:36 GMT -6
|
Post by cfreeland on Jun 29, 2014 11:48:20 GMT -6
Okay my scooter was running great until I got the bright idead to cut the connectors from the scooter and cdi to attempt to connect it differently. The first pic is my wires coming from my moped I haved tried to connect them by color but no luck   |
|
|
|
Post by Alleyoop on Jun 29, 2014 12:37:43 GMT -6
That is the worst CDI around READ THIS scooterdoc.proboards.com/thread/10270 And why would you want to switch wires around EACH WIRE from the stator DOES A SPECIFIC Thing, if they did not match you got the wrong CDI. Alleyoop 1. 1 Powers the CDI 2. 1 Triggers the CDI 3. 1 Feeds power to the COIL 4. 1 or 2 are grounds 5. 1 IS the KILLWIRE  |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jun 29, 2014 12:53:28 GMT -6
wiring it wrong could have burned it out . the green from the scooter and the two greens on the cdi go together , leave the black's off , red to red , green/white to the blue ,yellow to black/yellow . if it runs black to black/white otherwise you won't be able to shut it down .
John
|
|
Clinician
Currently Offline
Posts: 31
Likes: 0
Joined: Jun 29, 2014 11:31:36 GMT -6
|
Post by cfreeland on Jun 29, 2014 19:03:14 GMT -6
wiring it wrong could have burned it out . the green from the scooter and the two greens on the cdi go together , leave the black's off , red to red , green/white to the blue ,yellow to black/yellow . if it runs black to black/white otherwise you won't be able to shut it down . John I tried it that way I think im going to have to buy a new cdi. Any suggestions on which brand is decent |
|
Doc's Anything Goes
Currently Offline
Posts: 2,739
Likes: 66
Joined: Oct 23, 2010 19:29:21 GMT -6
|
Post by tvnacman on Jun 30, 2014 4:02:04 GMT -6
if you call me today we can talk about a new cdi , I only sell cdi's that I test .
John
|
|
Clinician
Currently Offline
Posts: 17
Likes: 0
Joined: Jun 7, 2014 3:09:02 GMT -6
|
Post by scootcanic on Jun 30, 2014 8:31:44 GMT -6
I will also put a plug in for John's gold Casoli CDI. Well worth the money. Easy starts and good solid performance. Go the distance and get one!
I had that blue thing in one of my friends' scoots and first time out it failed. Ditch that thing asap.
|
|
Clinician
Currently Offline
Posts: 31
Likes: 0
Joined: Jun 29, 2014 11:31:36 GMT -6
|
Post by cfreeland on Jun 30, 2014 16:38:31 GMT -6
That is the worst CDI around READ THIS scooterdoc.proboards.com/thread/10270 And why would you want to switch wires around EACH WIRE from the stator DOES A SPECIFIC Thing, if they did not match you got the wrong CDI. Alleyoop 1. 1 Powers the CDI 2. 1 Triggers the CDI 3. 1 Feeds power to the COIL 4. 1 or 2 are grounds 5. 1 IS the KILLWIRE Where do I place the green and white? |
|
|
|
Post by Alleyoop on Jun 30, 2014 19:42:57 GMT -6
Here you go I made it easy for you just connect the SAME NUMBERS. Alleyoop CLICK ON THE PICTURE SO IT EXPAND AND YOU CAN READ THEM BETTER  |
|
Clinician
Currently Offline
Posts: 31
Likes: 0
Joined: Jun 29, 2014 11:31:36 GMT -6
|
Post by cfreeland on Jul 1, 2014 4:28:42 GMT -6
That is the worst CDI around READ THIS scooterdoc.proboards.com/thread/10270 And why would you want to switch wires around EACH WIRE from the stator DOES A SPECIFIC Thing, if they did not match you got the wrong CDI. Alleyoop 1. 1 Powers the CDI 2. 1 Triggers the CDI 3. 1 Feeds power to the COIL 4. 1 or 2 are grounds 5. 1 IS the KILLWIRE I appreciate tbe help. But I should have clarified it for a box like above not the blue cdi but the stock black ones |
|
|
|
Post by Alleyoop on Jul 1, 2014 12:00:07 GMT -6
 1. GREEN/WHITE 2. YELLOW/BLACK 3. GROUND 4. OPEN 5. BLACK/WHITE 6. RED/BLACK  |
|
..BAD TO THE BONE..
