strange semi circle air fuel mixture screw By seanstr (Read 2,193 times)

[seanstr]

D shaped air fuel mixture screw

[seanstr]

Aug 14, 2014 6:21:59 GMT -6 seanstr said:

D shaped air fuel mixture screw

I attached a photo but it didn't show up

[Bashan]

e-mail it to me, [e-mail]

[Alleyoop]

That is the type that they now started putting in so that you need a special tool to turn it. But we are more clever than that, just unscrew it out and cut a slot in it so a screw driver fits.
Alleyoop

[Alleyoop]

That is the type that they now started putting in so that you need a special tool which are very expensive by the way to turn it, They are called security screws. But we are more clever than that, just unscrew it out and cut a slot in it so a small screw driver fits.
Alleyoop

[richardv]

Or if you wish to do it right get one of these from Sears:

www.sears.com/schwaben-100-piece-security-bit-set/p-00932988000P?prdNo=10&blockNo=160&blockType=G160

I have seen smaller selections at auto parts stores.

[seanstr]

Aug 14, 2014 11:29:17 GMT -6 Alleyoop said:

That is the type that they now started putting in so that you need a special tool which are very expensive by the way to turn it, They are called security screws. But we are more clever than that, just unscrew it out and cut a slot in it so a small screw driver fits.
Alleyoop

It is different than that picture

[seanstr]

Aug 14, 2014 8:55:19 GMT -6 Bashan said:

e-mail it to me, [e-mail]

I emailed it too you

[Alleyoop]

[seanstr]

Aug 14, 2014 20:00:03 GMT -6 Alleyoop said:

Once rich gets photo. I can just email you

[Alleyoop]

You need a host to post pictures, you can use photobucket or here is an easy one they are both free:
Alleyoop

HERE IS HOW TO POST PICTURES USING THIS HOST. IT IS EASY AND FREE:

1. Click on this link:
tinypic.com/index.php

2. Click on Browse, that will link to your computer.
3. Find what you want to load.
3. Click on the name of the picture
4. Click on OPEN
5. Click on UPLOAD
6. Click on the LINK that starts with IMG.
7. RIGHT CLICK and CLICK on COPY
8. THEN Come here to your THREAD ON DOC.
9. RIGHT CLICK and CLICK ON PASTE.
Alleyoop

[Bashan]

Here's his pic, click for a much larger view:

[Guitarman]

Take the screw out and cut a slot in it where the red line is.

[Alleyoop]

Here you go to get it out if you cannot get it out with long nose pliers:
Alleyoop
www.amazon.com/Motion-Pro-Replacement-D-Shaped-08-0242/dp/B003CMWC4U

[seanstr]

Aug 14, 2014 20:40:09 GMT -6 Alleyoop said:

Here you go to get it out if you cannot get it out with long nose pliers:
Alleyoop
www.amazon.com/Motion-Pro-Replacement-D-Shaped-08-0242/dp/B003CMWC4U

I ordered the tool bit, thank you