Treasure coast Trike kit To help explain more of what I did By robertban (Read 460 times)

[robertban]

 
Here are some more pictures to give you an ideal of what the scooter will look like when all the plastic is added and some of my setups that I used. Once I get the scooter running like it should I will post completed picture just got to figure out what is causing it to flutter and die while trying to take off when the engine gets warmed up

[jct842]

What size tires are on the axle? That looks a whole lot better than the training wheel type set up. The brackets that go between axle and motor seem a little thin. On a trailer you get a axle adjusted by measuring the diagonal between each wheel and the hitch, imagine you could do the same using the fork legs to wheels. John

[robertban]

Hi jct842 (( Man Your Riding The Scooter I Need LOL ))

Yep it is 3/16" steel but trust me it will hold more than the aluminum that its bolted to and like I told Alleyoop I'm not to thrilled about this design even though due to my condition I will ride short distance around town (and I definitely wouldn't let anyone including myself take it out of town) If not under the weather tomorrow I'll go out and get you the tire size

[robertban]

Hi jct842
My Tire Size 225/40-10 or 18x10.00-10 If this helps you

[Alleyoop]

Sept 30, 2014 21:04:29 GMT -6 robertban said:

Hi jct842
My Tire Size 225/40-10 or 18x10.00-10 If this helps you

That is the same size tires my Trike came with I know have 205/65x10 tires on it.
Alleyoop